Interface and Description |
---|
curam.core.facade.intf.Prospect
Since Curam 6.0.5.0 replaced with . This
class is deprecated because 'Prospect' participant type is no longer in use.
Equivalent methods from ProspectPerson can be used instead. See release note
: CR00348318.
|
curam.core.intf.ScanTimeouts
Since Curam 6.0.3.0 , replaced with
curam.core.facade.intf.ScanTaskDeadlines.scanDeadlines(BatchProcessingDate) .
Previously, this batch job redirected to a new batch job that was created
with the introduction of dynamic workflow. The new batch process batch
contains the operation which scans for expired task deadlines and executes
the processing defined for the deadline in the associated task metadata.
See release note CR00309046. |
Class and Description |
---|
curam.core.facade.base.Prospect
Since Curam 6.0.5.0 replaced with . This
class is deprecated because 'Prospect' participant type is no longer in use.
Equivalent methods from ProspectPerson can be used instead. See release note
: CR00348318.
|
curam.core.facade.fact.ProspectFactory
Since Curam 6.0.5.0 replaced with . This
class is deprecated because 'Prospect' participant type is no longer in use.
Equivalent methods from ProspectPerson can be used instead. See release note
: CR00348318.
|
curam.core.impl.ScanTimeouts
Since Curam 6.0.3.0, replaced with
ScanTaskDeadlines.scanDeadlines(BatchProcessingDate)
.
Previously, this batch job redirected to a new batch job that was created
with the introduction of dynamic workflow. The new batch process batch
contains the operation which scans for expired task deadlines and executes
the processing defined for the deadline in the associated task metadata.
See release note CR00309046. |
curam.core.base.ScanTimeouts
Since Curam 6.0.3.0 , replaced with
curam.core.facade.intf.ScanTaskDeadlines.scanDeadlines(BatchProcessingDate) .
Previously, this batch job redirected to a new batch job that was created
with the introduction of dynamic workflow. The new batch process batch
contains the operation which scans for expired task deadlines and executes
the processing defined for the deadline in the associated task metadata.
See release note CR00309046. |
curam.core.fact.ScanTimeoutsFactory
Since Curam 6.0.3.0 , replaced with
curam.core.facade.intf.ScanTaskDeadlines.scanDeadlines(BatchProcessingDate) .
Previously, this batch job redirected to a new batch job that was created
with the introduction of dynamic workflow. The new batch process batch
contains the operation which scans for expired task deadlines and executes
the processing defined for the deadline in the associated task metadata.
See release note CR00309046. |
Method and Description |
---|
curam.core.facade.intf.Organization.activeUserDetailsSearch(UserSearchKey)
Since Curam 6.0 SP2, replaced with
Organization.searchActiveUserDetails(UserSearchKey) .
This method is deprecated as informational messages are not returned. This
method is replaced by searchActiveUserDetails(UserSearchKey) which returns
the informational message along with user details as well.
See release note: CS-09152/CR00282028. |
curam.core.facade.intf.Prospect.cancelCitizenship(ProspectCancelCitizenshipKey)
Since Curam 6.0.5.0 replaced with . This method is deprecated because
'Prospect' participant type is no longer in use. Equivalent method from
ProspectPerson can be used instead. See release note : CR00348318.
Presentation layer operation to cancel a citizenship for a prospect.
|
curam.core.facade.intf.Prospect.cancelEmployment(ProspectCancelEmploymentKey)
Since Curam 6.0.5.0 replaced with . This method is deprecated because
'Prospect' participant type is no longer in use. Equivalent method from
ProspectPerson can be used instead. See release note : CR00348318.
Presentation layer operation to cancel an employment for a prospect.
|
curam.core.facade.intf.Prospect.cancelForeignResidency(CancelForeignResidencyKey)
Since Curam 6.0.5.0 replaced with . This method is deprecated
because 'Prospect' participant type is no longer in use. Equivalent method
from ProspectPerson can be used instead. See release note : CR00348318.
Presentation layer operation to cancel a Foreign residency for a prospect.
|
curam.core.facade.intf.Prospect.cancelProspectPersonName(CancelProspectPersonNameKey)
Since Curam 6.0.5.0 replaced with . This method is deprecated because
'Prospect' participant type is no longer in use. Equivalent method from
ProspectPerson can be used instead. See release note : CR00348318.
|
curam.core.facade.intf.Prospect.cancelRelationship(CancelProspectPersonRelationshipDetailsKey)
Since Curam 6.0.5.0 replaced with . This method is deprecated because
'Prospect' participant type is no longer in use. Equivalent method from
ProspectPerson can be used instead. See release note : CR00348318.
Presentation layer operation to cancel a relationship for a prospect.
|
curam.core.facade.intf.Organization.cancelUserSkillDetails(CancelUserSkillDetails)
Since Curam 6.0.5.0, replaced with
#cancelUserSkillsDetails(UserLanguageSkillCreationDetails) This method is
deprecated because of the new requirement where informational has to be
return when the redetermination of translator required runs on batch. See
release note: CR00341851. |
curam.core.facade.intf.Prospect.createCitizenship(CreateCitizenshipDetails)
Since Curam 6.0.5.0 replaced with . This method is deprecated because
'Prospect' participant type is no longer in use. Equivalent method from
ProspectPerson can be used instead. See release note : CR00348318.
Presentation layer method to create a citizenship for a prospect.
|
curam.core.facade.intf.Product.createDeliveryPattern(CreateDeliveryPatternDetails)
Since Curam 6.0 SP2, replaced by
Product#createDeliveryPatternInfo()
The existing method,createDeliveryPattern, does not support the display of
informational message to be shown when the offset does not have an effect
on delivery pattern. Hence the new method createDeliveryPatternInfo has
been created, which will validate the offset against a delivery pattern
and returns the informational message.
See release note: CEF-8154 |
curam.core.facade.intf.Prospect.createEmployment(CreateEmploymentDetails)
Since Curam 6.0.5.0 replaced with . This method is deprecated because
'Prospect' participant type is no longer in use. Equivalent method from
ProspectPerson can be used instead. See release note : CR00348318.
Presentation layer method to create an employment for a prospect.
|
curam.core.facade.intf.Prospect.createForeignResidency(CreateForeignResidencyDetails)
Since Curam 6.0.5.0 replaced with . This method is deprecated
because 'Prospect' participant type is no longer in use. Equivalent method
from ProspectPerson can be used instead. See release note : CR00348318.
Presentation layer method to create a foreign residency for a prospect.
|
curam.core.facade.intf.Prospect.createProspectPersonName(MaintainProspectPersonDetails)
Since Curam 6.0.5.0 replaced with . This method is deprecated because
'Prospect' participant type is no longer in use. Equivalent method from
ProspectPerson can be used instead. See release note : CR00348318.
Presentation layer operation to create a prospect person.
|
curam.core.facade.intf.Prospect.createRelationship(MaintainProspectPersonRelationships)
Since Curam 6.0.5.0 replaced with . This method is deprecated because
'Prospect' participant type is no longer in use. Equivalent method from
ProspectPerson can be used instead. See release note : CR00348318.
Presentation layer operation to create a relationship for a prospect.
|
curam.core.facade.intf.Organization.createUserSkillLanguages(UserLanguageSkillCreationDetails)
Since Curam 6.0.5.0, replaced with
Organization.createUserSkillsLanguages(UserLanguageSkillCreationDetails) This method
is deprecated because of the new requirement where informational has to be
return when the redetermination of translator required runs on batch. See
release note: CR00341851. |
curam.core.facade.intf.WorkAllocation.createWorkQueueSubsrciption(CreateWorkQueueSubsrciptionDetails)
Since Curam 6.0 This method has been replaced by
WorkAllocation.createWorkQueueSubscription(WorkQueueSubscriptionDetails) . See release
note CR00242506. |
curam.eligibilitytimelinecalendar.intf.TimelineCalendar.getCaseMembers(TimelineCalendarKey)
since 7.0
This functionality forms part of a feature that is no longer relevant to
the product strategy and will not be replaced.
|
curam.eligibilitytimelinecalendar.intf.TimelineCalendar.getConcernRoleListInformation(TimelineCalendarKey)
since 7.0
This functionality forms part of a feature that is no longer relevant to
the product strategy and will not be replaced.
|
curam.core.facade.intf.ContactLog.getDefaultContactLogDetails() |
curam.eligibilitytimelinecalendar.intf.TimelineCalendar.getYears()
since 7.0
This functionality forms part of a feature that is no longer relevant to
the product strategy and will not be replaced.
|
curam.core.facade.intf.WorkAllocation.listCasesForWorkQueueOwner(CatStatusRefUserType)
by Case.caseDefaultSearchByOwner.
Returns a list of cases which are owned by a specified Work Queue for
which the User is a member and which have been filtered by case category
and status.
|
curam.core.facade.intf.Prospect.listCitizenship(ListCitizenshipKey)
Since Curam 6.0.5.0 replaced with . This method is deprecated because
'Prospect' participant type is no longer in use. Equivalent method from
ProspectPerson can be used instead. See release note : CR00348318.
Presentation layer operation to list citizenships for a prospect.
|
curam.core.facade.intf.Employer.listContact(ListContactKey)
Since Curam 6.0 SP3, replaced by
#listConcernContact() . The return struct of the current method
listContact has an aggregation to the struct ConcernContactRMDtls, the
attribute statusCode in the struct ConcernContactRMDtls is modeled with a
domain of CONTACTSTATUS code-table, but the corresponding entity attribute
ConcernRoleContactDtls.statusCode is modeled with a domain of
RECORD_STATUS_CODE. So new method is introduced to return new struct
ListConcernContactDetails which has an aggregation to the new struct
ConcernContactRMultiDtls where the attribute statusCode is modeled with a
domain of RECORD_STATUS_CODE.See release note: CEF-8999. |
curam.core.facade.intf.Participant.listContact(ListContactKey)
Since Curam 6.0 SP3, replaced by
listConcernContact()
.The return struct of the current method listContact has an aggregation
to the struct ConcernContactDtls, the attribute statusCode in the struct
ConcernContactDtls is modeled with a domain of CONTACTSTATUS code-table,
but the corresponding entity attribute ConcernRoleContactDtls.statusCode
is modeled with a domain of RECORD_STATUS_CODE. So new method is
introduced to return new struct ListConcernContactDetails which has an
aggregation to the new struct 'ConcernContactRMultiDtls' where the
attribute statusCode is modeled with a domain of RECORD_STATUS_CODE. See
release note: CEF-8999. |
curam.core.facade.intf.Person.listContact(ListContactKey)
Since Curam 6.0 SP3, replaced by
#listConcernContact() . The return struct of the current method
listContact has an aggregation to the struct ConcernContactRMDtls, the
attribute statusCode in the struct ConcernContactRMDtls is modeled with a
domain of CONTACTSTATUS code-table, but the corresponding entity attribute
ConcernRoleContactDtls.statusCode is modeled
with a domain of RECORD_STATUS_CODE. So new method is introduced to return
new struct ListConcernContactDetails
which has an aggregation to the new struct ConcernContactRMultiDtls where
the attribute statusCode is modeled with a domain of RECORD_STATUS_CODE.
See release note: CEF-8999. |
curam.core.facade.intf.ProspectEmployer.listContact(ListContactKey)
Since Curam 6.0 SP3, replaced by
#listConcernContact() . The return struct of the current method
listContact has an aggregation to the struct ConcernContactRMDtls, the
attribute statusCode in the struct ConcernContactRMDtls is modeled with a
domain of CONTACTSTATUS code-table, but the corresponding entity attribute
ConcernRoleContactDtls.statusCode is modeled with a domain of
RECORD_STATUS_CODE. So new method is introduced to return new struct
ListConcernContactDetails which has an aggregation to the new struct
ConcernContactRMultiDtls where the attribute statusCode is modeled with a
domain of RECORD_STATUS_CODE. See release note: CEF-8999. |
curam.core.facade.intf.ProspectPerson.listContact(ListContactKey)
Since Curam 6.0 SP3, replaced by
#listConcernContact() . The return struct of the current method
listContact has an aggregation to the struct ConcernContactRMDtls, the
attribute statusCode in the struct ConcernContactRMDtls is modeled with a
domain of CONTACTSTATUS code-table, but the corresponding entity attribute
ConcernRoleContactDtls.statusCode is modeled
with a domain of RECORD_STATUS_CODE. So new method is introduced to return
new struct ListConcernContactDetails
which has an aggregation to the new struct ConcernContactRMultiDtls where
the attribute statusCode is modeled with a domain of RECORD_STATUS_CODE.
See release note: CEF-8999. |
curam.core.facade.intf.Case.listContactLog1(CaseKey)
and replaced by method listCaseContactLogs(CaseKey).
Since V6.0.5.4.see release notes of CR00407986.Method to list Contact Log
details for a Case.
|
curam.core.facade.intf.Incidents.listContactLogForIncident1(IncidentKey)
and replaced by method listIncidentContactLogDetails(CaseKey).
Since V6.0.5.4.see release notes of CR00407986.Method to list Contact Logs
for an Incident.
|
curam.core.facade.intf.IntegratedCase.listContract(ListContractKey)
by listContractDetails.
|
curam.core.facade.intf.WorkAllocation.listCurrentUserWorkQueues()
Since Curam 6.0, this method has been replaced by
WorkAllocation.listUserOrgObjectWorkQueues() . See release note CR00230325 |
curam.core.facade.intf.Prospect.listEmployment(ListEmploymentKey)
Since Curam 6.0.5.0 replaced with . This method is deprecated because
'Prospect' participant type is no longer in use. Equivalent method from
ProspectPerson can be used instead. See release note : CR00348318.
Presentation layer operation to list employments for a prospect.
|
curam.core.facade.intf.ExternalParty.listExternalPartyContact(ExternalPartyKey)
Since Curam 6.0 SP3, replaced by
#listExternalPartyConcernContact() . The return struct of the current
method listExternalPartyContact has an aggregation to the struct
ConcernContactRMDtls, the attribute statusCode in the struct
ConcernContactRMDtls is modeled with a domain of CONTACTSTATUS code-table,
but the corresponding entity attribute ConcernRoleContactDtls.statusCode
is modeled with a domain of RECORD_STATUS_CODE. So new method is
introduced to return new struct ExternalPartyConcernContactDetailsList
which has an aggregation to the new struct ConcernContactRMultiDtls where
the attribute statusCode is modeled with a domain ofRECORD_STATUS_CODE.
See release note: CEF-8999. |
curam.core.facade.intf.Prospect.listForeignResidency(ListForeignResidencyKey)
Since Curam 6.0.5.0 replaced with . This method is deprecated because
'Prospect' participant type is no longer in use. Equivalent method from
ProspectPerson can be used instead. See release note : CR00348318.
Presentation layer operation to list Foreign Residencies for a prospect.
|
curam.core.facade.intf.Incidents.listIncidentsForDuplicateParticipant1(ConcernRoleKey)
by listIncidentsForDuplicateParticipant2.
|
curam.core.facade.intf.Prospect.listProspectPersonNameDetails(ReadProspectPersonListKey)
Since Curam 6.0.5.0 replaced with . This method is deprecated because
'Prospect' participant type is no longer in use. Equivalent method from
ProspectPerson can be used instead. See release note : CR00348318.
Presentation layer operation to list prospect persons.
|
curam.core.facade.intf.Prospect.listRelationship(ReadProspectPersonRelationshipListKey)
Since Curam 6.0.5.0 replaced with . This method is deprecated because
'Prospect' participant type is no longer in use. Equivalent method from
ProspectPerson can be used instead. See release note : CR00348318.
Presentation layer operation to list relationships for a prospect.
|
curam.core.facade.intf.Organization.listResolutionApprovalCheckForOrgUnit(ListOrgUnitResolutionApprovalCheckKey)
Since Curam 6.0.5.0, replaced with
listResolutionApprovalCheckForOrgUnitAndVersionNo()
This method is being deprecated as the return struct does not have
versionNo attribute.
This method lists all existing approval checks for an org unit.
|
curam.core.facade.intf.Organization.listResolutionApprovalCheckForUser(ListUserResolutionApprovalCheckKey)
Since Curam 6.0.5.0, replaced with
listResolutionApprovalCheckForUserAndVersionNo().
This method is being deprecated as the return struct does not have
versionNo attribute.
This method lists all existing approval checks for a user.
|
curam.core.facade.intf.Organization.listUserSkill(UserSkillListKey)
Since Curam 6.0.4.0, replaced with
Organization.getUserSkills(UserSkillListKey) .
This method is being deprecated as the return struct does not have an
attribute to identify the language skill type.
See release note: CR00322668/CEF-9913. |
curam.core.facade.intf.WorkAllocation.listWorkQueueSubsrciptions(ListWorkQueueSubsrciptionsKey)
Since Curam 6.0 , replaced with
WorkAllocation#listAllWorkQueueSubscriptions(ListWorkQueueSubsrciptionsKey) .
In addition to current funcationality, the new method returns struct
curam.core.sl.struct.ListWorkQueueSubscriptionsDtls, which aggregates
struct curam.core.sl.entity.struct.WorkQueueSubscriptionFullDetailsList,
which further
aggregates struct
curam.core.sl.entity.struct.WorkQueueSubscriptionFullDetails, and this
struct
has all the fields of WorkQueueSubscriptionDetails along with fields
subscriberID,
subscriberName, subscriberType, unsubscribePageText, pageTitle,
organisationUnitID,
organisationStructureID and objectType.
See release note : |
curam.core.facade.intf.Prospect.modifyCitizenship(ModifyCitizenshipDetails)
Since Curam 6.0.5.0 replaced with . This method is deprecated because
'Prospect' participant type is no longer in use. Equivalent method from
ProspectPerson can be used instead. See release note : CR00348318.
Presentation layer operation to modify a citizenship for a prospect.
|
curam.core.facade.intf.Employer.modifyContact(ModifyContactDetails)
Since Curam 6.0 SP3, replaced by
#modifyConcernContact() .The parameter struct of the current method
modifyContact has an aggregation to the struct ConcernContactDtls, the
attribute statusCode in the struct ConcernContactDtls is modeled with a
domain of CONTACTSTATUS code-table, but the corresponding entity attribute
ConcernRoleContactDtls.statusCode is modeled with a domain of
RECORD_STATUS_CODE. So new method is introduced to have new parameter
ModifyConcernContactDetails
which has an aggregation to the new struct ConcernContactRMultiDtls where
the attribute statusCode is modeled with a domain of RECORD_STATUS_CODE.
See release note: CEF-8999. |
curam.core.facade.intf.Participant.modifyContact(ModifyContactDetails)
Since Curam 6.0 SP3, replaced by
#modifyConcernContact() . The parameter struct of the current method
modifyContact has an aggregation to the struct ConcernContactDtls, the
attribute statusCode in the struct ConcernContactDtls is modeled with a
domain of CONTACTSTATUS code-table, but the corresponding entity attribute
ConcernRoleContactDtls.statusCode is modeled with a domain of
RECORD_STATUS_CODE. So new method is introduced to have new parameter
ModifyConcernContactDetails
which has an aggregation to the new struct 'ConcernContactRMultiDtls'
where the attribute statusCode is modeled with a domain of
RECORD_STATUS_CODE. See release note: CEF-8999. |
curam.core.facade.intf.Person.modifyContact(ModifyContactDetails)
Since Curam 6.0 SP3, replaced by
#modifyConcernContact() .
The parameter struct of the current method modifyContact has an
aggregation to the struct ConcernContactDtls, the attribute
statusCode in the struct ConcernContactDtls is modeled with a domain of
CONTACTSTATUS code-table, but the corresponding
entity attribute ConcernRoleContactDtls.statusCode is modeled with a
domain of RECORD_STATUS_CODE. So new method is
introduced to have new parameter ModifyConcernContactDetails which has an
aggregation to the new struct ConcernContactRMultiDtls where the attribute
statusCode is modeled with a domain of RECORD_STATUS_CODE. See release
note:
CEF-8999. |
curam.core.facade.intf.ProspectEmployer.modifyContact(ModifyContactDetails)
Since Curam 6.0 SP3, replaced by
#modifyConcernContact() . The parameter struct of the current method
modifyContact has an aggregation to the struct ConcernContactDtls, the
attribute statusCode in the struct ConcernContactDtls is modeled with a
domain of CONTACTSTATUS code-table, but the corresponding entity attribute
ConcernRoleContactDtls.statusCode is modeled with a domain of
RECORD_STATUS_CODE. So new method is introduced to have new parameter
ModifyConcernContactDetails
which has an aggregation to the new struct ConcernContactRMultiDtls where
the attribute statusCode is modeled with a domain of RECORD_STATUS_CODE.
See release note:CEF-8999. |
curam.core.facade.intf.ProspectPerson.modifyContact(ModifyContactDetails)
Since Curam 6.0 SP3, replaced by
#modifyConcernContact() . The parameter struct of the current method
modifyContact has an aggregation to the struct ConcernContactDtls, the
attribute statusCode in the struct ConcernContactDtls is modeled with a
domain of CONTACTSTATUS code-table, but the corresponding entity attribute
ConcernRoleContactDtls.statusCode is modeled with a domain of
RECORD_STATUS_CODE. So new method is introduced to have new parameter
ModifyConcernContactDetails
which has an aggregation to the new struct ConcernContactRMultiDtls where
the attribute statusCode is modeled with a domain of RECORD_STATUS_CODE.
See release note:CEF-8999. |
curam.core.facade.intf.Product.modifyDeductionPriority(ModifyDeductionPriorityDetails)
Since Curam 6.0 SP2, replaced by modifyDeduction.
Modifies the priority for a deduction product link record.
|
curam.core.facade.intf.Product.modifyDeliveryPattern(ModifyDeliverPatternDetails)
since curam 6.0 , replaced by
Product#modifyProductDeliveryPattern()
See release note: CR00235829.
Modifies details of a delivery pattern. |
curam.core.facade.intf.Prospect.modifyEmployment(ModifyEmploymentDetails)
Since Curam 6.0.5.0 replaced with . This method is deprecated because
'Prospect' participant type is no longer in use. Equivalent method from
ProspectPerson can be used instead. See release note : CR00348318.
Presentation layer operation to modify an employment for a prospect.
|
curam.core.facade.intf.Prospect.modifyForeignResidency(ModifyForeignResidencyDetails)
Since Curam 6.0.5.0 replaced with . This method is deprecated
because 'Prospect' participant type is no longer in use. Equivalent method
from ProspectPerson can be used instead. See release note : CR00348318.
Presentation layer operation to modify a Foreign residency for a prospect.
|
curam.core.facade.intf.Product.modifyProductDeliveryPattern(ModifyProductDeliveryPatternDetails)
Since Curam 6.0 SP2, replaced by
Product#modifyProductDeliveryPatternInfo()
The existing method, modifyProductDeliveryPattern, does not support the
display of informational message to be shown when the offset does not have
an effect on delivery pattern. Hence the new method
modifyProductDeliveryPatternInfo has been created, which will validate the
offset against a delivery pattern and returns the informational message.
See release note: CEF-8154 |
curam.core.facade.intf.Prospect.modifyProspectPerson(ModifyProspectPersonDetails)
Since Curam 6.0.5.0 replaced with . This method is deprecated because
'Prospect' participant type is no longer in use. Equivalent method from
ProspectPerson can be used instead. See release note : CR00348318.
Modifies a prospect person details. Called during application processing.
|
curam.core.facade.intf.Prospect.modifyProspectPersonName(MaintainProspectPersonDetails)
Since Curam 6.0.5.0 replaced with . This method is deprecated because
'Prospect' participant type is no longer in use. Equivalent method from
ProspectPerson can be used instead. See release note : CR00348318.
Presentation layer operation to modify a prospect person.
|
curam.core.facade.intf.Prospect.modifyRelationship(MaintainProspectPersonRelationships)
Since Curam 6.0.5.0 replaced with . This method is deprecated because
'Prospect' participant type is no longer in use. Equivalent method from
ProspectPerson can be used instead. See release note : CR00348318.
Presentation layer operation to modify a relationship for a prospect.
|
curam.core.facade.fact.ProspectFactory.newInstance() |
curam.core.fact.ScanTimeoutsFactory.newInstance() |
curam.core.sl.infrastructure.base.EvidenceController.performCaseSecurityCheck(long)
Since Curam 6.0 SP1, replaced with
EvidenceController.performCaseSecurityCheck(long, int) . The method was deprecated as part
of location based security updates. See release note:CR00283697.
Function to perform the case level maintain security check. |
curam.core.facade.base.Auditor.potentialAuditorSearch(UserSearchKey, AuditPlanKey)
Since Curam 6.0 SP1, replaced by searchAvailableAuditors().
New method filters out auditors / audit coordinators that don't have the
the security access to the case audit type. See release note
|
curam.core.facade.intf.Case.previewCaseContactLogs1(PreviewCaseContactLogKey)
Since Curam 6.0.5.0, replaced with
previewCaseContactLogDetails(previewCaseContactLogIDkey). This method
has been deprecated as the size of the key is increased . See release
note: CR00342633.
Method to preview list of Case Contact Logs.
|
curam.core.facade.intf.ContactLog.previewContactLogs1(ContactLogPreviewKey)
Since Curam 6.0.5.0, replaced with
previewContactLogs(ContactLogPreviewIDKey).This method
has been deprecated as the size of the key is increased . See release
note: CR00342633.
Method to preview a list of Contact Logs.
|
curam.core.facade.intf.Incidents.previewIncidentContactLogs(PreviewIncidentContactLogKey)
Since Curam 6.0.5.0, replaced with
previewIncidentContactLogDetails(previewIncidentContactLogIDkey). This
method
has been deprecated as the size of the key is increased . See release
note: CR00357485.
Method to preview list of Incident Contact Logs.
|
curam.meetings.facade.intf.MeetingManagement.processMeetingResponses() |
curam.core.facade.intf.Person.readByReferenceNumber(PersonAlternateIDSearchKey)
Since Curam 6.0.5.3
|
curam.core.facade.intf.Prospect.readCitizenship(ProspectReadCitizenshipKey)
Since Curam 6.0.5.0 replaced with . This method is deprecated because
'Prospect' participant type is no longer in use. Equivalent method from
ProspectPerson can be used instead. See release note : CR00348318.
Presentation layer operation to read details of a citizenship for a
prospect.
|
curam.core.facade.intf.Employer.readContact(ReadContactKey)
Since Curam 6.0 SP3, replaced by
#readConcernContact() . The return struct of the current method
readContact has an aggregation to the struct ConcernContactDtls, the
attribute statusCode in the struct ConcernContactDtls is modeled with a
domain of CONTACTSTATUS code-table, but the corresponding entity attribute
ConcernRoleContactDtls.statusCode is modeled with a domain of
RECORD_STATUS_CODE. So new method is introduced to return new struct
ReadConcernContactDetails which has an aggregation to the new struct
ConcernContactRMultiDtls where the attribute statusCode is modeled with a
domain of RECORD_STATUS_CODE. See release note: CEF-8999. |
curam.core.facade.intf.Participant.readContact(ReadContactKey)
Since Curam 6.0 SP3, replaced by
#readConcernContact() . The return struct of the current method
readContact has an aggregation to the struct ConcernContactDtls, the
attribute statusCode in the struct ConcernContactDtls is modeled with a
domain of CONTACTSTATUS code-table, but the corresponding entity attribute
ConcernRoleContactDtls.statusCode is modeled with a domain of
RECORD_STATUS_CODE. So new method is introduced to return new struct
ReadConcernContactDetails which has an aggregation to the new struct
'ConcernContactRMultiDtls' where the attribute statusCode is modeled with
a domain of RECORD_STATUS_CODE. See release note:CEF-8999. |
curam.core.facade.intf.Person.readContact(ReadContactKey)
Since Curam 6.0 SP3, replaced by
#readConcernContact() . The return struct of the current method
readContact has an aggregation to the struct ConcernContactDtls, the
attribute statusCode in the struct ConcernContactDtls is modeled with a
domain of CONTACTSTATUS code-table, but the corresponding entity attribute
ConcernRoleContactDtls.statusCode is modeled
with a domain of RECORD_STATUS_CODE. So new method is introduced to return
new struct ReadConcernContactDetails
which has an aggregation to the new struct ConcernContactRMultiDtls where
the attribute statusCode is modeled with a domain of RECORD_STATUS_CODE.
See release note: CEF-8999. |
curam.core.facade.intf.ProspectEmployer.readContact(ReadContactKey)
Since Curam 6.0 SP3, replaced by
readConcernContact()
.The return struct of the current method
readContact has an aggregation to the struct ConcernContactDtls, the
attribute statusCode in the struct ConcernContactDtls is modeled with a
domain of CONTACTSTATUS code-table, but the corresponding entity attribute
ConcernRoleContactDtls.statusCode is modeled with a domain of
RECORD_STATUS_CODE. So new method is introduced to return new struct
ReadConcernContactDetails which has an aggregation to the new struct
ConcernContactRMultiDtls where the attribute statusCode is modeled with a
domain of
RECORD_STATUS_CODE. See release note: CEF-8999. |
curam.core.facade.intf.ProspectPerson.readContact(ReadContactKey)
Since Curam 6.0 SP3, replaced by
readConcernContact()
.The return struct of the current method
readContact has an aggregation to the struct ConcernContactDtls, the
attribute statusCode in the struct ConcernContactDtls is modeled with a
domain of CONTACTSTATUS code-table, but the corresponding entity attribute
ConcernRoleContactDtls.statusCode is modeled with a domain of
RECORD_STATUS_CODE. So new method is introduced to return new struct
ReadConcernContactDetails which has an aggregation to the new struct
'ConcernContactRMultiDtls' where the attribute statusCode is modeled with
a domain of
RECORD_STATUS_CODE. See release note: CEF-8999. |
curam.core.facade.intf.ContactLog.readContactLogDetails(ContactLogKey)
Since Curam 6.0.5.0, replaced with
previewContactLogs(ContactLogPreviewIDKey).This method
has been deprecated as the create date sholud be displayed as datetime.
See release note: CR00348367.
Reads contact tab details.
|
curam.core.facade.intf.Prospect.readEmployment(ProspectReadEmploymentKey)
Since Curam 6.0.5.0 replaced with . This method is deprecated because
'Prospect' participant type is no longer in use. Equivalent method from
ProspectPerson can be used instead. See release note : CR00348318.
Presentation layer operation to read details of an employment for a
prospect.
|
curam.core.facade.intf.ExternalParty.readExternalPartyContact(ContactReadKey)
Since Curam 6.0 SP3, replaced by
#readExternalPartyConcernContact() . The return struct of the current
method readExternalPartyContact has an aggregation to the struct
ConcernContactDtls, the attribute statusCode in the struct
ConcernContactDtls is modeled with a domain of CONTACTSTATUS code-table,
but the corresponding entity attribute ConcernRoleContactDtls.statusCode
is modeled with a domain of RECORD_STATUS_CODE. So new method is
introduced to return new struct ExternalPartyConcernContactDetails which
has an aggregation to the new struct ConcernContactRMultiDtls where the
attribute statusCode is modeled with a domain of RECORD_STATUS_CODE. See
release note: CEF-8999. |
curam.core.facade.intf.Prospect.readForeignResidency(ReadForeignResidencyKey)
Since Curam 6.0.5.0 replaced with . This method is deprecated because
'Prospect' participant type is no longer in use. Equivalent method from
ProspectPerson can be used instead. See release note : CR00348318.
Presentation layer operation to read details of a foreign residency for a
prospect.
|
curam.core.facade.intf.Product.readLiabilityProduct(ProductKeyStruct)
by readLiabilityProduct1.
Reads details of a liability product.
|
curam.core.facade.intf.Prospect.readProspectPersonHomePage(ReadProspectPersonHomePageKey)
Since Curam 6.0.5.0 replaced with . This method is deprecated because
'Prospect' participant type is no longer in use. Equivalent method from
ProspectPerson can be used instead. See release note : CR00348318.
Presentation layer operation to read the home page details of the prospect.
|
curam.core.facade.intf.Prospect.readProspectPersonNameDetails(ReadProspectPersonNameKey)
Since Curam 6.0.5.0 replaced with . This method is deprecated because
'Prospect' participant type is no longer in use. Equivalent method from
ProspectPerson can be used instead. See release note : CR00348318.
Presentation layer operation to read the details of a prospect person.
|
curam.core.facade.intf.Prospect.readRelationship(ReadProspectPersonRelationshipDetailsKey)
Since Curam 6.0.5.0 replaced with . This method is deprecated because
'Prospect' participant type is no longer in use. Equivalent method from
ProspectPerson can be used instead. See release note : CR00348318.
Presentation layer operation to read details of a relationship for a
prospect.
|
curam.core.facade.intf.Prospect.registerPersonFromProspect(RegisterPersonFromProspectKey)
Since Curam 6.0.5.0 replaced with . This method is
deprecated because 'Prospect' participant type is no longer in use.
Equivalent method from ProspectPerson can be used instead. See release
note : CR00348318.
Registers a person from a prospect person by converting the concern type
to person and creating the associated concern role mandatory data not
previously required when creating a prospect person. Called during
application processing.
|
curam.core.facade.intf.Prospect.registerProspectPerson(RegisterProspectPersonDetails)
Since Curam 6.0.5.0 replaced with . This method is deprecated
because 'Prospect' participant type is no longer in use. Equivalent method
from ProspectPerson can be used instead. See release note : CR00348318.
Presentation layer operation to register a prospect person.
|
curam.core.facade.intf.Prospect.removeEmployment(RemoveEmploymentKey)
Since Curam 6.0.5.0 replaced with . This method is deprecated because
'Prospect' participant type is no longer in use. Equivalent method from
ProspectPerson can be used instead. See release note : CR00348318.
Presentation layer operation to remove an employment for a prospect.
|
curam.core.intf.ScanTimeouts.scanTimeouts(BatchProcessingDate) |
curam.core.facade.intf.ProductProvider.search1(ParticipantSearchKey)
Since Curam 6.0 SP2, replaced with
ProductProvider.searchProductProvider(ParticipantSearchKey)
This method is deprecated as informational messages are not returned. This
method is replaced by searchProductProvider(ParticipantSearchKey) which
returns the informational message along with product provider details as
well. See release note: CS-09152/CR00290965. |
curam.core.facade.intf.ServiceSupplier.search1(ParticipantSearchKey)
Since Curam 6.0 SP2, replaced with
ServiceSupplier.searchServiceSupplier(ParticipantSearchKey)
This method is deprecated as informational messages are not returned. This
method is replaced by searchServiceSupplier(ParticipantSearchKey) which
returns the informational message along with service supplier details as
well. See release note: CS-09152/CR00290965. |
curam.core.facade.intf.Utility.search1(UtilitySearchKey)
Since Curam 6.0 SP2, replaced with
Utility.searchUtility(UtilitySearchKey)
This method is deprecated as informational messages are not returned. This
method is replaced by searchUtility(UtilitySearchKey) which returns the
informational message along with utility details as well. See release
note: CS-09152/CR00290965. |
curam.core.base.AdminUser.searchActiveUsers(UserSearchCriteria)
Since Curam 5.2SP4, replaced with {@link
#searchActiveUserDetails(UserSearchCriteria)}. This method is deprecated
because it was not allowing to do a search based on the start date of a
position.The The searchActiveUserDetails method considers the start date
of a position also when doing a user search for the active positions.See
release note: CR00215472
|
curam.core.base.AdminUser.searchAllActiveUsers(UserSearchCriteria)
Since Curam 5.2SP4, replaced with {@link
#searchAllActiveUsersDetails(UserSearchCriteria)}. This method is
deprecated because it was not allowing to do a search based on the start
date of a position.The The searchAllActiveUsersDetails method considers
the start date of a position also when doing a user search for the active
positions. See release note: CR00215472
|
curam.core.facade.intf.CaseAudit.searchAuditCoordinators(UserSearchKey)
Since Curam 6.0 SP3, replaced by
searchAuditCoordinatorDetails.
Method to search for users with an auditor role.
|
curam.core.facade.intf.CaseAudit.searchAuditors(UserSearchKey)
Since Curam 6.0 SP3, replaced by searchAuditorDetails.
Method to search for users with an auditor role.
|
curam.core.base.AdminUser.searchByAllCriteria(UserSearchCriteria)
Since Curam 5.2SP4, replaced with
AdminUser.searchDetailsByAllCriteria(UserSearchCriteria) . This method is
deprecated because it was not allowing to do a search based on the start
date of a position.The The searchDetailsByAllCriteria method considers the
start date of a position also when doing a user search for the active
positions.See release note: CR00215472 |
curam.core.sl.base.UserAccess.searchExternalSubscriptionsByWorkQueueID(SearchSubscriptionsByWorkQueueIDKey)
Since Curam 6.0 , replaced with
UserAccess.searchExternalUserSubscriptionsByWorkQueueID(
SearchSubscriptionsByWorkQueueIDKey) .
In addition to the current functionality, the new method return struct
curam.core.sl.entity.struct.WorkQueueSubscriptionFullDetailsList which
aggregates
struct curam.core.sl.entity.struct.WorkQueueSubscriptionFullDetails, and
this struct
has all the fields of WorkQueueSubscriptionDetails along with fields
subscriberID,
subscriberName, subscriberType, unsubscribePageText, pageTitle,
organisationUnitID,
organisationStructureID and objectType.
See release note : |
curam.core.sl.base.UserAccess.searchExternalUserTasksByDueDate(UserTasksByDueDateKey)
Since Curam 6.0. This method has been replaced by
#searchExternalUserTasksByDueDate(TasksByDueDateKey , which uses the
TaskAssignment entity. See release note CR00223005. |
curam.core.sl.base.UserAccess.searchExternalUserTasksDueInTheNextWeek(UserTasksByDueDateKey)
Since Curam 6.0. This method has been replaced by
UserAccess.searchExternalUserTasksDueInTheNextWeek(TasksByDueDateKey) , which uses
the TaskAssignment entity. See release note CR00223005. |
curam.core.sl.base.UserAccess.searchInternalSubscriptionsByWorkQueueID(SearchSubscriptionsByWorkQueueIDKey)
Since Curam 6.0. This method has been replaced by
WorkQueueSubscription.listUserSubscriptionsForWorkQueue(WorkQueueKey) .
See release note CR00223005. |
curam.core.sl.base.UserAccess.searchInternalUserTasksByDueDate(UserTasksByDueDateKey)
Since Curam 6.0. This method has been replaced by
#searchInternalUserTasksByDueDate(TasksByDueDateKey , which uses the
TaskAssignment entity. See release note CR00223005. |
curam.core.sl.base.UserAccess.searchInternalUserTasksDueInTheNextWeek(UserTasksByDueDateKey)
Since Curam 6.0. This method has been replaced by
UserAccess.searchInternalUserTasksDueInTheNextWeek(TasksByDueDateKey) , which uses
the TaskAssignment entity. See release note CR00223005. |
curam.core.base.AdminUser.searchNonClosedUsers(UserSearchCriteria)
Since Curam 5.2SP4, replaced with
AdminUser.searchNonCloseduserDetails(UserSearchCriteria) . This method is
deprecated because it was not allowing to do a search based on the start
date of a position.The The searchNonCloseduserDetails method considers the
start date of a position also when doing a user search for the active
positions.See release note: CR00215472 |
curam.core.facade.intf.WorkAllocation.taskSearch(TaskSearchKey)
Since Curam 6.0, this method has been replaced by
curam.core.intf.TaskSearchRouter#searchTask(curam.core.sl.struct.TaskQueryCriteria)
because the task search functionality has been enhanced for Curam 6.0. |
curam.core.sl.infrastructure.intf.EvidenceController.transferParticipantEvidence(TransferEvidenceDetails)
Since Curam 6.0, replaced with
EvidenceController.transferParticipantEvidence1(TransferEvidenceDetails1) . The method was
deprecated as part of the evidence processing enhancements. See release
note:CR00245135.
Transfers evidence from one case to another for a case member. |
curam.core.facade.intf.Organization.userDetailsSearch(UserSearchKey)
Since Curam 6.0 SP2, replaced with
Organization.searchUserDetails(UserSearchKey) .
This method is being deprecated because it is not returning any
informational messages. So this replaced by new method
searchUserDetails(UserSearchKey key) which returns the informational
message as well . See release note: CS-09152/CR00282028 |
curam.core.facade.intf.Alert.visualiseProcessInstanceForAlert(AlertKey)
Since Bluewash 6.0.3.0, this method has been replaced by
Alert.viewProcessInstanceForAlert(AlertKey) . See Release Note
CR00309046. |